Bvbs

Bvbs Tekla Online

Daher unterstützen wir den BVBS aktiv zu Initiativen wie OpenBIM oder den GAEB-Datenaustausch, bzw. der STLB-Bau Zertifizierung.“ Dr. habil. Klaus Schiller. Der Bundesverband Bausoftware e.V., kurz BVBS e.V., ist der Verband der Softwareanbieter im Bauwesen. Many translated example sentences containing "bvbs" – German-English dictionary and search engine for German translations. BVBS Sie können die Geometrie von Bewehrungen im Format des BVBS (​Bundesverband Bausoftware e. V.) exportieren. Auf diese Weise erhalten Sie eine. BVBS Sie können die Geometrie von Bewehrungen im BVBS-Format exportieren​. Das Ergebnis ist eine ASCII-Datei mit der.

Bvbs

Many translated example sentences containing "bvbs" – German-English dictionary and search engine for German translations. BVBS Sie können die Geometrie von Bewehrungen im Format des BVBS (​Bundesverband Bausoftware e. V.) exportieren. Auf diese Weise erhalten Sie eine. Herzlich willkommen im eService-Portal des. Bundesamtes für Güterverkehr (​nachfolgend Bundesamt). Sie haben hier die Möglichkeit, das gesamte Antrags-​.

Unsere Anliegen Als Verband sind wir an der ständigen Weiterentwicklung von allgemein gültigen Standards und Normen ebenso interessiert, wie an der Mitarbeit politischer Entwicklungen den Bausektor betreffend.

Unsere Zertifizierungen. Unsere Mitglieder Unsere Mitgliedsunternehmen stammen aus unterschiedlichsten Fachbereichen, wie der Architektur, der Fachplanung, dem Bauingenieurwesen und der Bauausführung.

Das sagen unsere Mitglieder. Lesen Sie was unsere Mitglieder dazu bewegt hat unserem Verband beizutreten:.

Ing Reinhard Schley. Aktuelle Termine. Über den BVBS. Um die Webseite optimal gestalten und fortlaufend verbessern zu können, verwenden wir Cookies.

Durch die weitere Nutzung der Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Cookies zulassen Cookies blockieren Mehr erfahren.

The log file entry contains the ID of the reinforcing bar. You can locate the reinforcing bar in the model by selecting the appropriate row in the log file.

Note that the reinforcing bar is still exported normally and only the additional warning is given. Note that when the check is activated, the length of lattice girders is also checked.

A warning is added in the log when the check fails. The length of the main chord defines the exported length of the lattice girder.

On this tab you can define the UDA object property created by the user in order to widen the range of predefined object properties User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed.

For example, comment, locked, and erection status are user-defined attributes. Pour objects are visible in pour view.

You can tag UDAs based on release code, release status, release date and released by information. The options are No , Prevent export , Report to log , Report to log and overwrite , and Overwrite only.

The length of the reinforcing bar is calculated according to the BVBS specification. The length also depends on the bending angle.

Lengths L1 and L2 are exported. Note that the BVBS format specifications define that the overall length of the bar is ignored if the data contains actual geometry data.

Some other software applications may still use the overall length values in the BVBS file for calculating quantities. The exported overall length in Tekla Structures is the same length as shown in reports.

Need support? Fill in this form instead. Skip to main content. Export to the BVBS format Ensure that numbering process of assigning position numbers to parts, cast units, assemblies, or reinforcement In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

Go to the properties of the cast units and reinforcement that you plan to export, and edit the user-defined attributes on the BVBS tab as required.

The user-defined attributes are environment specific. Select the cast units with the desired reinforcement content, or select the reinforcement.

Define the BVBS export settings: On the Parameters tab, select: which reinforcement to export how to export drawing data how and where to export the BVBS file or files which BVBS elements to export You can use saved selection filters to exclude reinforcement bars or meshes matching with the selected filter.

On the Advanced tab, select whether you want to: round rebar lengths for 2D bent bars make meshes out of rebars include the detailed data of mesh reinforcement that represents a mesh of steel bars in two perpendicular directions In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

BVBS export uses arc geometry in two cases: For circular rebars such as spirals or hoops. On the Checking tab, select whether you want to run additional checks for the reinforcing bars.

Click Export. The BVBS file or files in. You can check the export report by clicking the report link that appears at the bottom of the dialog box.

Parameters tab Option Description Model objects to be exported Select which reinforcing bars or meshes are exported. Reinforcement of all cast units in the model Exports reinforcing bars or meshes in all cast units in the model.

Reinforcement of selected cast units Exports reinforcing bars or meshes in the cast units you have selected in the model. Selected reinforcement only Exports the reinforcing bars or meshes you have selected in the model or in the drawing.

Reinforcement of selected cast units totals by all positions Exports reinforcing bars or meshes in all the cast units that have the same cast unit position as any of the selected cast unit positions.

Excluding reinforcement by filter Exclude reinforcing bars or meshes by selecting any of the selection filters.

One file per each cast unit Export each cast unit reinforcement content to its own file. BVBS elements to be exported Select which item types are exported.

Reinforcement UDA Reinforcement template Assembly template By selecting the option Fixed text you can enter the values in the dialog box and same "fixed" values will be written for every exported rebar.

User-defined drawing name Enter a text string to be used for the drawing in the export. Rev Drawing revision index. Position source Define the source of the position.

User-defined reinforcement position Define the reinforcement UDA position number. Exported item with the same position number but different UDA position number will be exported to different rows.

Project number Define the project number. The options are: Project Properties : The export fetches the project number information from the project properties set in Tekla Structures.

The options are: Yes Up - Uses the nearest rounding value. Bent leg arc radius This setting defines which bending radius is used to calculate the arc length: Bending radius to the rebar center line Center line , which is the default for most interfaces, to the rebar inner edge Inner edge , or to the rebar outer edge Outer edge.

Try to make meshes of rebars Select whether the export tries to automatically form meshes of a single reinforcing bar or of a group reinforcing bars and export them as a mesh instead of separate 2D bars.

The options are: Yes, group rebars by class Yes, group rebars by name Yes, group rebars by grade Yes, group rebars by UDA In order to form a mesh the reinforcing bars need to belong to the same part, be straight, be on the same plane, and have equal filtering attribute values.

Custom and cut catalog meshes only Detailed bar data is included only for custom meshes and catalog meshes that have additional cuts, openings or skewed edges.

All meshes Detailed bar data is written for all meshes. None meshes Detailed bar data is not written to any of the meshes.

Export stepped bars as separate items By default a stepped group is exported as a single string with the stepping length defined in a certain data block.

Sort items Use this option to define the order of the items in the output files. The options are: No sorting By diameter, smaller size first By diameter, bigger size first By position number Private data block With Private data block you can control whether the private data block is exported Export private data block and select the data items for this additional block.

The following data types are available: - Reinforcement report property integer, float or text - User-defined attribute integer, float or text - Open API object property - Assembly report property integer, float or text Click the New Name in list The text shown in the Private data block list.

Field identifier one lower case letter The field code which separates the individual data fields in the private data block. Property or UDA name The value defines which data will be inquired from the reinforcement object.

Property data type The value has to match the actual selected property. Checking tab Option Description Check reinforcement Select whether you want to run additional checks for the following: Reinforcement diameters separated with spaces Minimum cutting length of reinforcing bars Maximum cutting length of the reinforcing bars Minimum leg length for straight sections between the bends Maximum weight of individual bars When you select the Check reinforcement check box, and the values of the exported reinforcing bar are less than the minimum or greater than the maximum, a warning is written to the export log file.

UDAs tab On this tab you can define the UDA object property created by the user in order to widen the range of predefined object properties User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed.

Quick feedback Did you find what you were looking for? What is missing? The feedback you give here is not visible to other users. We use your comments to improve our content.

Leave this field empty We use this to prevent automated spam submissions. Content rating :. Previous Next.

Select which item types are exported. Prüfungskriterien für den Bereich Mengenermittlung. Musterausdruck Zertifizierung 3.

Prüfungskriterien für den Bereich Texterstellung. Preisliste Zertifizierungen Stand Über den BVBS.

Impressum Datenschutzerklärung. Um die Webseite optimal gestalten und fortlaufend verbessern zu können, verwenden wir Cookies. Durch die weitere Nutzung der Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden.

Standards für die Zukunft im SHK Handwerk. Foto der BVBS Sitzung in Würzburg Der BVBS (Bundesverband Bausoftware e.V.) ist ein Interessenverband der. Herzlich willkommen im eService-Portal des. Bundesamtes für Güterverkehr (​nachfolgend Bundesamt). Sie haben hier die Möglichkeit, das gesamte Antrags-​. BVBS - Bundesverband Bausoftware e.V.. Ansprechpartner: Michael Fritz Schwarzer Weg 16 Celle. rehabilitacja-katowice.co Besuchen Sie uns auf: © Auf IT gebaut. seit Jahren das Ziel, stets GAEB-gerechte Anwendungen zu entwickeln - und sich dies auch vom Bundesverband Bausoftware (BVBS) zertifizieren zu lassen.

Bvbs Standards für die Zukunft im SHK Handwerk

Das sagen unsere Mitglieder. Geben Sie Informationen zum Datenelement ein. Der Gitterträger kann zwei oder drei Gurtstäbe und einen oder zwei diagonale Zig-Zag-Stäbe enthalten. Schenkellängen runden auf. Sie können auch Datenfelder learn more here und entfernen und deren Reihenfolge ändern. Mehr here. Die ständige Steigerung der Qualität im elektronischen Datenaustausch ist eines der Kernziele unseres Verbandes. Unsere Zertifizierungen Unsere Anliegen Als Verband sind wir an der ständigen Weiterentwicklung von allgemein gültigen Standards und Normen ebenso interessiert, wie an der Mitarbeit politischer Entwicklungen den HallenfuГџball Ball betreffend. Bvbs bars or meshes that match the filter are excluded. Erst nach einer erfolgreichen Prüfung wird die Consider, Weltbester FuГџballspieler for erteilt und die Konformität Bvbs den bestehenden Prüfungskriterien bescheinigt. Aktuelle Termine. Export stepped bars as separate items. Ja, Gruppieren der Bewehrung nach Benutzerdef. Exportiert Bewehrungsstäbe oder Matten in allen Bauteilen im Modell. All meshes. Wählen Sie die Bauteile mit den gewünschten Bewehrungsinhalten article source, oder wählen Sie die Bewehrung aus. Schenkellängen continue reading auf. Objekte sortieren. Fill in this form instead. Der Standardwert für article source Optionen lautet 1. Die Längen L1 und L2 werden exportiert. The supported version of the BVBS format is 2. Maximales Gewicht der einzelnen Stäbe. Bewehrung prüfen. Geben Sie Informationen zum Datenelement ein.

Bvbs Video

Bvbs Video

Ja, Gruppieren der Bewehrung Aktueller FuГџball Weltmeister Stahlgüte. Diese ermöglicht und fördert der BVBS. Ja, Gruppieren der Bewehrung nach Namen. Mehr erfahren. Lage Ursprung Legt die Quelle der Platzierung fest. Runden Runde Längen zu Schenkellängen runden auf. Bogenradius Kantblech. Wählen Sie aus, ob Sie zusätzliche Wta Stuttgart für Folgendes durchführen möchten:. Minimale Schnittlänge der Bewehrungsstäbe. Über den kompletten Lebenszyklus eines Gebäudes kann effiziente Bausoftware Ihre Arbeit strukturieren, helfen Fehler here vermeiden, sowie Termin- und Kostenvorgaben einzuhalten. Previous Next. Zu exportierende Modellobjekte. Der Wert definiert, welche Daten vom Bewehrungsobjekt abgefragt werden. Detaillierte Stabdaten sind nur für benutzerdefinierte Matten und Katalogmatten enthalten, die zusätzliche Schnitte, Öffnungen oder schräge Vorderkanten besitzen. Sie können mehrere Montagevorlageneigenschaften im Dateinamen verwenden. Lesen Sie was unsere Mitglieder dazu bewegt more info unserem Verband beizutreten:. Geben Sie Informationen zum Datenelement Bvbs. Bvbs

Auf der Entwicklung von Qualitätsstandards und deren Zertifizierung, sowie der gemeinsamen Erarbeitung von Datenstandards und Datenaustauschverfahren liegt unser Hauptaugenmerk.

Unsere Zertifizierungen Unsere Anliegen Als Verband sind wir an der ständigen Weiterentwicklung von allgemein gültigen Standards und Normen ebenso interessiert, wie an der Mitarbeit politischer Entwicklungen den Bausektor betreffend.

Unsere Zertifizierungen Unsere Mitglieder Unsere Mitgliedsunternehmen stammen aus unterschiedlichsten Fachbereichen, wie der Architektur, der Fachplanung, dem Bauingenieurwesen und der Bauausführung.

Zudem aus dem verarbeitenden Gewerbe, sind Baufachverlage und Dienstleister. Unsere Mitglieder Das sagen unsere Mitglieder. Diese ermöglicht und fördert der BVBS.

Impressum Datenschutzerklärung. BVBS-Mitgliederversammlung September in Berlin. Mehr erfahren. Unsere Mitglieder. Lernen Sie Sie unsere Mitgliedsunternehmen näher kennen.

Herzlich Willkommen beim Bundesverband Bausoftware e. Weitere Informationen. Zertifizierungen Geprüfte Qualitätssoftware von A-Z.

Unsere Anliegen Als Verband sind wir an der ständigen Weiterentwicklung von allgemein gültigen Standards und Normen ebenso interessiert, wie an der Mitarbeit politischer Entwicklungen den Bausektor betreffend.

Exporting of mesh bar data X.. Use this option to control whether the detailed data on mesh bars is included in the exported data of the mesh.

The appropriate option depends on the needs and capabilities of the receiving system. The data is needed if it will be used, for example, for mesh fabrication.

Custom and cut catalog meshes only. Detailed bar data is included only for custom meshes and catalog meshes that have additional cuts, openings or skewed edges.

All meshes. Detailed bar data is written for all meshes. None meshes. Detailed bar data is not written to any of the meshes.

Export stepped bars as separate items. By default a stepped group is exported as a single string with the stepping length defined in a certain data block.

If you select the value Yes for Exporting of mesh bar data X.. If all the tapered bars within the group have the same geometry and length, they will be exported within a single BVBS string as a regular group would, regardless of this setting.

Sort items. Use this option to define the order of the items in the output files. No sorting. By diameter, smaller size first.

By diameter, bigger size first. By position number. Private data block. With Private data block you can control whether the private data block is exported Export private data block and select the data items for this additional block.

The following data types are available:. Click the New Enter information about the data item. Name in list. The text shown in the Private data block list.

Field identifier one lower case letter. The field code which separates the individual data fields in the private data block.

It can be any lower case letter. Typically, it is a good practice to use a different value for each data item but this is not required.

The receiving system may also be able to read only certain data fields. Property or UDA name. The value defines which data will be inquired from the reinforcement object.

Note that a non-existing property will be not exported. Property data type. The value has to match the actual selected property.

Open API object property. You can also edit and remove data fields, and change their order. Check reinforcement.

Select whether you want to run additional checks for the following:. Reinforcement diameters separated with spaces.

Minimum cutting length of reinforcing bars. Maximum cutting length of the reinforcing bars. Minimum leg length for straight sections between the bends.

Maximum weight of individual bars. When you select the Check reinforcement check box, and the values of the exported reinforcing bar are less than the minimum or greater than the maximum, a warning is written to the export log file.

The log file entry contains the ID of the reinforcing bar. You can locate the reinforcing bar in the model by selecting the appropriate row in the log file.

Note that the reinforcing bar is still exported normally and only the additional warning is given. Note that when the check is activated, the length of lattice girders is also checked.

A warning is added in the log when the check fails. The length of the main chord defines the exported length of the lattice girder.

On this tab you can define the UDA object property created by the user in order to widen the range of predefined object properties User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed.

For example, comment, locked, and erection status are user-defined attributes. Pour objects are visible in pour view. You can tag UDAs based on release code, release status, release date and released by information.

The options are No , Prevent export , Report to log , Report to log and overwrite , and Overwrite only. The length of the reinforcing bar is calculated according to the BVBS specification.

The length also depends on the bending angle. Lengths L1 and L2 are exported. Note that the BVBS format specifications define that the overall length of the bar is ignored if the data contains actual geometry data.

Some other software applications may still use the overall length values in the BVBS file for calculating quantities.

The exported overall length in Tekla Structures is the same length as shown in reports. Need support? Fill in this form instead.

Skip to main content. Export to the BVBS format Ensure that numbering process of assigning position numbers to parts, cast units, assemblies, or reinforcement In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

Go to the properties of the cast units and reinforcement that you plan to export, and edit the user-defined attributes on the BVBS tab as required.

The user-defined attributes are environment specific. Select the cast units with the desired reinforcement content, or select the reinforcement.

Define the BVBS export settings: On the Parameters tab, select: which reinforcement to export how to export drawing data how and where to export the BVBS file or files which BVBS elements to export You can use saved selection filters to exclude reinforcement bars or meshes matching with the selected filter.

On the Advanced tab, select whether you want to: round rebar lengths for 2D bent bars make meshes out of rebars include the detailed data of mesh reinforcement that represents a mesh of steel bars in two perpendicular directions In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

BVBS export uses arc geometry in two cases: For circular rebars such as spirals or hoops. On the Checking tab, select whether you want to run additional checks for the reinforcing bars.

Click Export. The BVBS file or files in. You can check the export report by clicking the report link that appears at the bottom of the dialog box.

Parameters tab Option Description Model objects to be exported Select which reinforcing bars or meshes are exported.

Reinforcement of all cast units in the model Exports reinforcing bars or meshes in all cast units in the model. Reinforcement of selected cast units Exports reinforcing bars or meshes in the cast units you have selected in the model.

Selected reinforcement only Exports the reinforcing bars or meshes you have selected in the model or in the drawing.

Reinforcement of selected cast units totals by all positions Exports reinforcing bars or meshes in all the cast units that have the same cast unit position as any of the selected cast unit positions.

Excluding reinforcement by filter Exclude reinforcing bars or meshes by selecting any of the selection filters. One file per each cast unit Export each cast unit reinforcement content to its own file.

BVBS elements to be exported Select which item types are exported. Reinforcement UDA Reinforcement template Assembly template By selecting the option Fixed text you can enter the values in the dialog box and same "fixed" values will be written for every exported rebar.

User-defined drawing name Enter a text string to be used for the drawing in the export. Rev Drawing revision index.

Position source Define the source of the position. User-defined reinforcement position Define the reinforcement UDA position number.

Exported item with the same position number but different UDA position number will be exported to different rows. Project number Define the project number.

The options are: Project Properties : The export fetches the project number information from the project properties set in Tekla Structures.

The options are: Yes Up - Uses the nearest rounding value. Bent leg arc radius This setting defines which bending radius is used to calculate the arc length: Bending radius to the rebar center line Center line , which is the default for most interfaces, to the rebar inner edge Inner edge , or to the rebar outer edge Outer edge.

Try to make meshes of rebars Select whether the export tries to automatically form meshes of a single reinforcing bar or of a group reinforcing bars and export them as a mesh instead of separate 2D bars.

The options are: Yes, group rebars by class Yes, group rebars by name Yes, group rebars by grade Yes, group rebars by UDA In order to form a mesh the reinforcing bars need to belong to the same part, be straight, be on the same plane, and have equal filtering attribute values.

Custom and cut catalog meshes only Detailed bar data is included only for custom meshes and catalog meshes that have additional cuts, openings or skewed edges.

All meshes Detailed bar data is written for all meshes. None meshes Detailed bar data is not written to any of the meshes. Export stepped bars as separate items By default a stepped group is exported as a single string with the stepping length defined in a certain data block.

Sort items Use this option to define the order of the items in the output files. The options are: No sorting By diameter, smaller size first By diameter, bigger size first By position number Private data block With Private data block you can control whether the private data block is exported Export private data block and select the data items for this additional block.

The following data types are available: - Reinforcement report property integer, float or text - User-defined attribute integer, float or text - Open API object property - Assembly report property integer, float or text Click the New Name in list The text shown in the Private data block list.

Field identifier one lower case letter The field code which separates the individual data fields in the private data block. Property or UDA name The value defines which data will be inquired from the reinforcement object.

Property data type The value has to match the actual selected property.

Comments

Hinterlasse eine Antwort

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert *